It is a 0.5mm automotive black acrylic foam adhesive tape. It is very strong and thin. It helps you stick things together for a long time. This is a great automotive permanent bonding tape.
Our tape is a high-performance automotive adhesive. It is a strong bond auto foam tape with long-term durability. It’s not just tape; it is one of the best automotive attachment solutions. Here is why you should use it:
TOTAL THICKNESS | WIDTH | LENGTH | FOAM | ADHESIVE |
|---|---|---|---|---|
0.5MM (Customizable) |
10-800MM (Custom roll lengths) |
33M |
Acrylic foam |
Acrylic |
Foam Color | Holding Power | Strength | Annular initial adhesion(24mm*24mm) | Temperature |
|---|---|---|---|---|
Clear/Black/Grey |
≥24 |
≥ 800% |
≥ 2,000 g.f/in² |
-10-120℃ |
This tape is a true problem solver. It is a great alternative to 3M VHB tape for cars.
Attach Car Parts: Use it as a tape for car emblems and badges. It is the best tape for reattaching car emblems. You can reattach your car logo. It is a top automotive trim attachment tape and a great choice for body side molding adhesive tape. Use it for your rocker panel molding tape, cladding, or as a car spoiler mounting tape. It is the answer to how to attach car trim without drilling.
Fix Loose Parts: Do you need to know how to fix loose car body molding? This acrylic foam adhesive is your answer. It works for auto exterior trim adhesive and interior car trim mounting tape. It is a great car molding tape black.
Seal and Protect: It works as a weatherstrip adhesive tape for cars and as a gasket. It gives a waterproof seal for car accessories. Use it for door edge guard adhesive.
Mount Gadgets: It is the perfect automotive sensor mounting tape. Use this mounting tape for parking sensors, cameras, or LED strip light tape for cars. It is also a good dashboard component bonding tape.
For Signs and Buildings
This heavy-duty car mounting tape is also a structural bonding tape for vehicles and buildings. The black viscoelastic foam tape 0.5mm is great for putting up signs. It can hold a sign on many different walls. It can handle dissimilar materials.
For a strong bond, follow these steps.
Clean: Clean the spot. Use Isopropyl Alcohol. The surface energy must be right. Make sure it is dry.
Prime: For some plastics, use an adhesion promoter for automotive tape, like 3M Primer 94. This is part of good surface preparation for automotive tape.
Stick: Put the acrylic foam bonding tape on your part. Press down hard.
Wait: The bond gets stronger over time. Wait three days for the strongest hold.
Our VHB tapes can be used to bond a variety of substrates, including metals (such as aluminum, stainless steel), glass, various plastics (such as acrylic, polycarbonate, ABS), and coated surfaces. For low surface energy plastics (such as PP, PE), a primer may be required.
For best bonding results, the surface should be clean, dry, free of oil and dust. A mixture of isopropyl alcohol (IPA) and water (50/50) is recommended for cleaning.
VHB tape develops initial tack immediately after pressure is applied. It typically reaches approximately 50% of final strength after 20 minutes, approximately 90% after 24 hours, and 100% final bond strength after 72 hours (specific times may vary depending on temperature and substrate).
VHB tape develops initial tack immediately after pressure is applied. It typically reaches approximately 50% of final strength after 20 minutes, approximately 90% after 24 hours, and 100% final bond strength after 72 hours (specific times may vary depending on temperature and substrate).
Yes, many GMARK VHB tape series offer excellent weather resistance, including UV resistance, tolerance to high and low temperature fluctuations, and water resistance, making them well-suited for various outdoor applications. For example, they are widely used in architectural curtain walls, outdoor signage, automotive exterior trims, etc. It's important to select a specific VHB model rated for outdoor use; please consult the product specifications or our technical support.
Under recommended storage conditions (typically room temperature 20-25°C / 68-77°F, and 40-60% relative humidity), G MARK VHB tape generally has a shelf life of 18 to 24 months from the date of manufacture. Please store the tape in its original packaging, away from direct sunlight, extreme temperatures, and high humidity to ensure optimal performance. Refer to the product's technical data sheet for specific shelf life information.
Subscribe for the latest on our double-sided & foam tapes, easy free samples requests, and a faster way to get your inquiries answered.
Achieve greater productivity and cost-efficiency with GMARK’s professional double-sided tape and foam tape solutions.
Our Support and Sales team is available 24 /7 to answer your queries
Dongguan Gmark New Material Technology Co., Ltd. All Rights Reserved
